By . Engine Wiring. Publised at Wednesday, January 10th 2018, 08:19:07 AM. Throttle body fuel injection systems sort of work how carburetors did, but without the carburetor. Instead of each cylinder getting its own fuel injector, there’s only one fuel injector that goes to a throttle body. The fuel mixes with air in the throttle body and then is dispersed to the cylinders via the intake valves.
By Josselin Amaury. Engine Wiring. Published at Saturday, March 10th 2018, 01:36:47 AM. In order to create the combustion needed to move the pistons, we need fuel in the cylinders. Before the 1980s, cars used carburetors to supply fuel to the combustion chamber. Today, all cars use one of three fuel injection systems: direct fuel injection, ported fuel injection, or throttle body fuel injection.
By Jeannot Ludovic. Car Electrical Wiring. Published at Friday, March 09th 2018, 23:52:25 PM. Most components, however, require DC current to run. The solution is a set of diodes that serve as a kind of electrical check valve for current coming out of the alternator. Diodes only allow current to flow in one direction, so when AC goes in on one side, only DC comes out on the other.
By Gabin Placide. Car Radio Wiring. Published at Thursday, March 08th 2018, 11:51:56 AM. You will also want to leave enough room around the sides of the amp to connect wiring and make adjustments for boost, crossover, and other factors. Typical amplifier mounting locations include under the passenger side dash, under a seat, or in the trunk or hatch area. There are pro's and con's to each choice. Under the dash or seat keeps the wiring to the receiver shorter, but can be awkward to install. The seat may need to be temporarily removed. The trunk/hatch area is easily accessed, but wires then need to be routed the length of the vehicle. Cargo capacity can be compromised.
By Jeannot Ludovic. Engine Wiring. Published at Thursday, March 08th 2018, 07:05:43 AM. Cars typically have one intake valve and one outtake valve per cylinder. Most high-performing cars (Jaguars, Maseratis, etc.) have four valves per cylinder (two intake, two outtake). While not considered a “high performance” brand, Honda also uses four valves per cylinder on their vehicles. There are even engines with three valves per cylinder — two inlet valves, one outtake valve. Multi-valve systems allow the car to “breathe” better, which in turn improves engine performance.
By Lazare Anthelme. Car Electrical Wiring. Published at Thursday, March 08th 2018, 03:12:03 AM. Thealternator is powered by the engine connected by a serpentine belt. This unit creates electrical power by utilizing a magnetized armature and outer copper windings which are connected to the battery using brushes. While in operation (engine running) this unit supplies electrical power for the vehicle while charging the battery at the same time.
By . Car Electrical Wiring. Published at Wednesday, March 07th 2018, 20:05:49 PM. Medium duty fuses are used to protect average amperage circuits such as power windows and seat heaters. These fuses also provide an observation window which is needed for inspection.
By Jeannot Ludovic. Engine Wiring. Published at Wednesday, March 07th 2018, 15:24:37 PM. On the top of the piston, you’ll find three or four grooves cast into the metal. Inside the grooves piston rings are put in. The piston rings are the part that actually touch the walls of the cylinder. They are made from iron and come in two varieties: compression rings and oil rings. The compression rings are the top rings and they press outward on the walls of the cylinder to provide a strong seal for the combustion chamber. The oil ring is the bottom ring on a piston and it prevents oil from the crankcase from seeping into the combustion chamber. It also wipes excess oil down the cylinder walls and back into the crankcase.
evansarenachryslerdodgejeepblog - Car Wiring Diagram Gallery
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.