By Hadrien Gratien. Car Electrical Wiring. Publised at Monday, January 08th 2018, 12:47:34 PM. Installers and OEMs alike go to great means to tie up wires and protect them from their environment. A few minutes of precaution here can prevent untold hours spent repairing a damaged system later on.
By Hadrien Gratien. Engine Wiring. Published at Monday, March 05th 2018, 11:54:42 AM. There are two types of valves: intake valves and outtake valves. Intake valves bring a mixture of air and fuel into the combustion chamber to create the combustion to power the engine. Outtake valves let the exhaust that’s created after the combustion out of the combustion chamber.
By Hadrien Gratien. Car Electrical Wiring. Published at Monday, March 05th 2018, 07:56:01 AM. Finally low amperage fuses are used to protect smaller amperage circuits such as tail lights and interior lighting. These fuses are easily checked using a test light.
By Mathis Camille. Car Electrical Wiring. Published at Monday, March 05th 2018, 05:47:39 AM. This is more a shopping tip than anything, but it still bears mentioning. Like everything else in this world, there are varying degrees of wire quality. For years the standby wire insulation was Polyvinyl Chloride or PVC. Relatively tough, flexible, and inexpensive, it gets the job done, however, PVC is a thermoplastic. And like other thermoplastics like lacquers and synthetic enamels, it tends to oxidize and brittle with age.
By Lazare Anthelme. Car Electrical Wiring. Published at Monday, March 05th 2018, 05:05:48 AM. The other major issue within a car electrical system is that not all components tolerate the same amount of current strength or amperage. Therefore, the system must include voltage regulators and fuses to moderate flow and protect components that cannot handle the amperage supplied by the alternator. Fuses protect circuits when placed in front of the load (component). If a voltage spike causes too much amperage sent to the headlights, a fuse designed to “blow” at 15 amps will do so, preventing the current from continuing on to cook the headlight itself.
By Lazare Anthelme. Car Electrical Wiring. Published at Monday, March 05th 2018, 04:11:59 AM. Cross-linked polyethylene insulation is far more durable yet doesn’t cost much more. It’s a thermo-setting plastic, which means it has a molecular structure that cross-links into very durable chains. And like other thermo-setting plastics, like polyurethanes, it remains pliable and resists oxidation and abrasion to a far greater degree.
By . Engine Wiring. Published at Sunday, March 04th 2018, 23:16:44 PM. Most camshafts extend through the top part of the engine block, directly above the crankshaft. On inline engines, a single camshaft controls both the intake and outtake valves. On V-shaped engines, two separate camshafts are used. One controls the valves on one side of the V and the other controls the valves on the opposite side. Some V-shaped engines (like the one in our illustration) will even have two camshafts per cylinder bank. One camshaft controls one side of valves, and the other camshaft controls the other side.
By Jeannot Ludovic. Car Electrical Wiring. Published at Sunday, March 04th 2018, 22:52:05 PM. The negative side of the battery is connected to the body, frame and engine block of the vehicle. These metal parts acts as a conductive connector for positive battery power completing the electrical circuit.
evansarenachryslerdodgejeepblog - Car Wiring Diagram Gallery
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.