Once you run the wire from the radio to the fuse box area, you're almost done. Just strip away about half an inch from the end of the power wire, and then insert the bare wire into the butt connector on the fuse tap lead. Use the crimp connector to secure the power wire to the lead, and then plug the fuse tap into an available slot in the fuse panel. If performing the job in an older car, first strip about half an inch from the end of the power wire. Then use the Phillips screwdriver to secure the bare wire to an unused terminal on the fuse box. Insert an appropriately rated fuse into the slot on the head of the fuse tap plug, or the fuse box itself in classic vehicles and you're done. Just reconnect the negative battery cable, turn on the ignition and fire up the radio. If you have already connected the radio to your car speakers, it should be able to play music immediately.
Automotive circuits are quite simple in design. Remember always that the factory used as little wire as possible, so look at the schematic diagram to see where multiple connections are made. Remember also that your friendly electron travels through several devices on its way to doing its work so you need to systematically trace the path.
evansarenachryslerdodgejeepblog - Car Wiring Diagram Gallery
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.