A good ground connection is vital for proper stereo performance and to eliminate unwanted noise. If you are not using a custom wiring harness, look for a bare, unpainted bolt or screw that contacts the bare metal of your vehicle's chassis. Loosen the bolt, slip the ground wire underneath (this is almost always a black wire), then tighten the bolt. If your ground wire doesn't contact bare metal, your stereo won't operate. A loose or weak ground connection can result in signal noise interfering with your music.
American cars built before the early 1980s often came with a "shaft-style" stereo, which secured to the dash via nuts and washers to the right and left knobs. A shaft-style stereo must be installed from behind the dash. Getting it into position is the tricky part, since your vehicle's wiring, heater controls, and ductwork may be in the way.
evansarenachryslerdodgejeepblog - Car Wiring Diagram Gallery
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.