If you find yourself with a broken circuit make sure it is professionally repaired to make sure it doesn’t happen again. This may include replacing a single wire or an entire section of your vehicle’s wiring harness. Bad wiring can be difficult to track down and can cause a lot of problems with your vehicle. Make sure to have any electrical problems you have fixed quickly and professionally to avoid future problems and a possible fire hazard.
Once you run the wire from the radio to the fuse box area, you're almost done. Just strip away about half an inch from the end of the power wire, and then insert the bare wire into the butt connector on the fuse tap lead. Use the crimp connector to secure the power wire to the lead, and then plug the fuse tap into an available slot in the fuse panel. If performing the job in an older car, first strip about half an inch from the end of the power wire. Then use the Phillips screwdriver to secure the bare wire to an unused terminal on the fuse box. Insert an appropriately rated fuse into the slot on the head of the fuse tap plug, or the fuse box itself in classic vehicles and you're done. Just reconnect the negative battery cable, turn on the ignition and fire up the radio. If you have already connected the radio to your car speakers, it should be able to play music immediately.
evansarenachryslerdodgejeepblog - Car Wiring Diagram Gallery
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.